Bi-Pod Recycle Chutes
 Our Bi-Pod recycle chute utilizes a design which allows the tenants to dispose of their trash thru a larger chute section, while disposing of recycling within the same door opening. The Bi-Pod chute features compartments for Plastic and Glass, cans & metal in one chute duct and trash in another.
The trash duct will channel into our Royal-Pak compaction system, while each of the recycling ducts will funnel their respective materials into a recycling bin for easy disposal by the building staff.
The Bi-Pod recycle chute features a large 36" wide UL 1 & 1 ½ hour fire rated door that is engineered to be opened easily. Each duct is labeled to instruct the tenants to dispose of their wastes and recyclables into the correct opening.
The Bi-Pod Recycle Chute discharge can be designed to function with most room layouts.
Specifications: TRASH & RECYCLING BI-POD CHUTES
Bi Pod trash and recycling system as manufactured and installed by Royal-Pak Systems Inc. (201) 569-8888. These systems must be provided by a firm specializing in the fabrication and installation of such work for at least a five (5) year period.
Chute shall be 27 in square and shall be fabricated of 16 gauge aluminized or galvanized steel. It shall be separated into two (2) ducts for the discharge of trash and co-mingled recyclables; cans & metal and plastic & glass. Chute riser shall be welded and slip jointed construction with no interior fasteners of crimped joints. Contractor shall provide plumb floor openings of 29" x 29".
Intake doors to be 27" wide x 18" high, noiseless, self closing, self latching, bottom hinged, hand-operated with stainless steel finish and rubber safety baffles. Door shall bear Underwriters 1½ hour fire label
Chute transition shall deviate to suit discharge into compactor placement and recycle bins.
Floor support frames shall be fabricated of 3/16" steel x 2" flat bar.
Sprinkler arrangements shall be supplied with corresponding openings in the chute, at the top intake level and alternate floors beneath, to be connected to the building sprinkler system by a licensed plumber. The sprinkler pendant shall be located within the throat section of the trash duct, and shall be protected by a 16 gauge galvanized shield.
The chute shall be equipped above the top intake door with a wash down sanitizing system, requiring connection by a licensed plumber to a hose thread connection. The sanitizing system shall be piped within the chute to provide an even spray into the trash section of the chute.
The chutes shall be reduced above the sanitizing unit to a 24 round duct for roof penetration. The chute shall penetrate the roof a minimum of 4-0 above the roof slab with a vent cap and curb or flat flashing.
Note: When chute extends through roof and is next to machine room, use 90* offset with 24 x 24 louver in lien of vent cap (height is over 60) bottom of louver is 40.
Compactors Specs Sheet
| 
